...

BP1 Shunt bus

• In the electrical system that meets the installation requirements specified in the German industrial standard VDE 0125 or the lnternational Electrotechnical Commission 60204-1/European Electrotechnical Commission 60204-1/VDE 0113-1 and the lnternational Electrotechnical Commission 60439, the neutral wire, protective ground wire or phase wire are usually connected with the central bus.This requires a clear label on the conductor or junction box of the corresponding circuit.

Product description

• In the electrical system that meets the installation requirements specified in the German industrial standard VDE 0125 or the lnternational Electrotechnical Commission 60204-1/European Electrotechnical Commission 60204-1/VDE 0113-1 and the lnternational Electrotechnical Commission 60439, the neutral wire, protective ground wire or phase wire are usually connected with the central bus.This requires a clear label on the conductor or junction box of the corresponding circuit.
• The connection terminal board meets these conditions in two ways:
-By marking each junction box individually
-Blue, green-yellow or black housing.

 

Specification parameter

Model Connection size(mm)
thickness x width
Outline size(mm)
thickness x width
Bus size(mm)
length ×wide X high
BP1-125A/12W 2×5 2×20 180x49x46
BP1-125A/18W 2×5 2×20 234x49x46
BP1-125A/24W 2×5 2×20 288x49x46
BP1-125A/30W 2×5 2×20 342x49x46
BP1-125A/36W 2×5 2×20 396x49x46
BP1-125A/42W 2×5 2×20 450x49x46
BP1-125A/48W 2×5 2×20 504x49x46
BP1-125A/54W 2×5 2×20 588x49x46
BP1-125A/60W 2×5 2×20 612x49x46
BP1-250A/12W 3×5 3×20 180x49x46
BP1-250A/18W 3×5 3×20 234x49x46
BP1-250A/24W 3×5 3×20 288x49x46
BP1-250A/30W 3×5 3×20 342x49x46
BP1-250A/36W 3×5 3×20 396x49x46
BP1-250A/42W 3×5 3×20 450x49x46
BP1-250A/48W 3×5 3×20 504x49x46
BP1-250A/54W 3×5 3×20 588x49x46
BP1-250A/60W 3×5 3×20 612x49x46